Documentation guide
Motor starter (3RK1308‑0**00‑0CP0)
32
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to perform commissioning and maintenance
activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of
TIA Portal.
The SIMATIC Automation Tool provides a multitude of functions:
●
Scanning of a PROFINET/Ethernet system network and identification of all connected
CPUs
●
Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a
CPU
●
Transfer of the date and the programming device/PC time converted to UTC time to the
module
●
Program download to CPU
●
RUN/STOP mode switchover
●
CPU localization by means of LED flashing
●
Reading out of CPU error information
●
Reading of the CPU diagnostics buffer
●
Reset to factory settings
●
Firmware update of the CPU and connected modules
You can find the SIMATIC Automation Tool on the Internet
https://support.industry.siemens.com/cs/ww/en/view/98161300
PRONETA
SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network
during commissioning. PRONETA features two core functions:
●
The topology overview automatically scans the PROFINET and all connected
components.
●
The IO check is a fast test of the wiring and the module configuration of a plant.
You can find SIEMENS PRONETA on the Internet
