Parameters/address space
7.6 Declaration of parameters
Motor start
er (3RK1308‑0**00‑0CP0)
148
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003
Thermal motor model (response to overload)
You use this device parameter to determine how the motor starter is to respond to overload.
For more information, see Chapter Overload protection (Page 76).
Response to CPU/master STOP
Determines the module's response to CPU STOP.
For more information, see Chapter Response to CPU/master STOP (Page 102).
Response to residual current detection
You use this device parameter to specify how the motor starter is to respond to residual
current detection.
For more information, see Chapter Response to residual current detection (Page 89).
Response to asymmetry
You use this device parameter to determine how the motor starter is to behave in the event
of asymmetry.
For more information, see Chapter Asymmetry monitoring (Page 98).
Warning limit motor heating
The motor starter displays a warning if the motor heating limit is overshot. You use this
parameter to preset a motor heating value in percent as a warning limit. At a warning limit of
0 %, the function is deactivated.
For more information, see Chapter Overload protection (Page 76).
