background image

3TK2845 Multifunction Device Manual

5-2

GWA 4NEB 926 2087-22 DS 01

5.1

3TK2845-.HB40 "Monitored Start-up and Automatic 
Start-up", Instantaneous Outputs

Brief description:

Monitoring an EMERGENCY-STOP control switch with monitored start-up, 
protective door monitoring with automatic start-up and maintenance according to 
Category 4, EN 954-1.

Properties:

Stop category 0 according to EN 60204-1;

Two electronic enabling circuits;

Two floating enabling circuits;

One electronic signaling output;

U

s

 24 V DC

Function:

Standard operation:

When the EMERGENCY-STOP control switch is activated, outputs 14, 24 (M1) 

and 34, 44 (M2) switch off. The outputs are switched back on again when the 

EMERGENCY-STOP control switch releases, the feedback circuit at Y64 is 

closed and the START button Y34 is activated.

When the protective door is activated, outputs 14, 24 (M1) and 34, 44 (M2) also 

switch off.

The outputs are automatically switched back on again when the protective door 

is closed.

Maintenance:

When the key-operated switch is operated, outputs 34, 44 (M2) switch off and 

the position switches of the protective door are not evaluated. When the key-

operated switch is operated once again with the protective door closed, outputs 

34, 44 (M2) switch on automatically. 

When the EMERGENCY-STOP control switch is activated during maintenance, 

outputs 14 and 24 (M1) also switch off. The outputs can only be switched back 

on again when the EMERGENCY-STOP control switch releases, the feedback 

circuit at Y64 is closed and the START button Y34 is activated.

Note: 

Connecting several position switches in series for protective door monitoring is 
not permissible for Category 4 according to EN 954-1 (fault detection).

Notice

Sensor cables should be routed in a protected manner; only safety sensors with 
positively-opening contacts may be used as sensors.

Summary of Contents for 3TK2845





































































Reviews: