Siemens 3VA1 100 A Manual Download

Page: 237 / 532

Accessories

4.4 Plug-in and draw-out technology

3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02

237

4.4.7.3

Combination with other accessories

Information about combination with other accessories

●

The communications interface for the draw-out unit and the switches for signaling the

position of the molded case circuit breaker in the draw-out unit are mutually compatible.

For further information, please refer to the following chapters:

Position signaling switches (Page 225)
Communications interface for draw-out unit (Page 230)

●

The switches for signaling whether or not the molded case circuit breaker is locked have

no influence on other accessories described in chapter Position signaling switches

(Page 225)

Note
No transfer of "locked / not locked" signals
The information "locked / not locked" cannot be transferred via the COM060

communication module.

●

A molded case circuit breaker which requires a communications interface to transfer

signals must be equipped with a COM060 communication module.

●

When internal accessories are integrated in a molded case circuit breaker, auxiliary circuit

connectors and cable cages for plug-in and draw-out technology must also be installed.

●

Door feedthroughs are required only if the molded case circuit breaker needs to be

operated when the cubicle door is closed. The door feedthrough is compatible with

position signaling switches, communications interface and auxiliary circuit connectors

with cable cages.

●

The terminal cover for plug-in technology can be installed in combination with any other

internal accessories. It does not have any effect on other accessories.

●

A variable depth adapter (see section Door mounted rotary operator (Page 244)) can be

used in conjunction with the door mounted rotary operator in order to compensate the

racking distance and so allow the molded case circuit breaker to be moved out when the

cubicle door is closed.

Summary of Contents for 3VA1 100 A





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3VA1 100 A

Reviews:

Related manuals for 3VA1 100 A

Brands by name

Popular brands

Siemens 3VA1 100 A, Manual

Search results

Summary of Contents for 3VA1 100 A

Reviews:

Related manuals for 3VA1 100 A

Brands by name

Popular brands