39
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Komfortabel.fm
5.7.01
Step
by
Step
Putting internal subscribers on hold
You are conducting an internal call.
Press [CONSULT]: The internal subscriber is put on hold.
You can set up an external enquiry call.
To end the external call, press
or
*
for the menu and select [End] followed
by [OK]. You are then returned to the internal call and the external connection
is closed.
or
Three-way calling: press [CONF.]. This establishes the conference circuit.
Parking/continuing calls (“unpark”)
You are conducting an external call which you would like to transfer to another
telephone at your ISDN connection, for example.
Press
or
*
for the menu.
Select using [
] and [OK]:
Call Park
.
Enter a parking number (one or two digits) and confirm with [OK].
Press
.
Unparking a call before answering
Press
or
*
for selection menus.
Select using [
] and [OK]:
Service Set up or Base Set up
o
Call preparat.
o
Cancel CallPark
.
Enter the parking number assigned previously and confirm with [OK].
“Cancel CallPark” after answering a call
Press
D
.
Press
or
*
for the menu.
Select using [
] and [OK]:
Cancel CallPark
.
Enter the parking number assigned previously and confirm with [OK].
Calling line identification restriction (CLIR)
If you withhold your number from other parties, you can activate the calling line
identification restriction. You can set up CLIR for just the next call or
permanently. If set up permanently your call number will be suppressed both
for outgoing calls (CLIR) and for incoming calls (COLR). This feature must be
supported by your provider.
Temporary calling line identification restriction
Press
or
*
for selection menus.
Select using [
] and [OK]:
Service Set up or Base Set up
o
Call preparat.
o
Withhold No.
(
'
in front of Withhold No. = ON / no = OFF).
Confirm with [OK]:
$IWHUWKHFDOOWKLVUHVWULFWLRQLVOLIWHG<RXUQXPEHUZLOOQRWEHZLWKKHOGIURPWKH
QH[WSDUW\FDOOHG7KLVDSSOLHVHYHQLI\RXVHOHFWDQXPEHUIURPWKHUHGLDOOLVW
Permanent calling line identification restriction
Press
or
*
for selection menus.
1.
2.
2.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
Info
1.
