Siemens IK PI · 2004
6/84
AS-Interface Slaves
SlimLine
I/O modules for operation in IP20 control cabinet
6
■
Technical specifications
(continued)
4 inputs/4 outputs
4 inputs/4 outputs
Spring-loaded connection
Spring-loaded connection
Standard slave
Standard slave
2- and 3-wire
2- and 3-wire
PNP transistor (1 A)
Relay
3RK1 402-3CG01-0AA2
3RK1 402-3CG00-0AA2
Total current input in mA
£
40
£
270
Inputs
• Sensor supply via AS-Interface
Short-circuit and overload withstand capability
Short-circuit and overload withstand capability
• Voltage range in V
20 to 30
20 to 30
• Current carrying capacity
for sensor supply in mA
200
200
• Connection of sensors
2- and 3-wire system
2- and 3-wire system
• Switching level High in V
³
10
³
10
• Input current Low/High in mA
£
1.5 /
³
5
£
1.5 /
³
5
Outputs
• Type of output
Electronics
Relay
• Current carrying capacity
per output in A DC 12 / DC 13 typ.
1
--
• Maximum summation current
per module in A
4
--
• Short-circuit protection
Built-in
External back-up fuse 6 A gL/gG
• Inductive interference protection
(free-wheeling diode)
Built-in
Not applicable
• Polarity reversal protection
Built-in
Built-in
• External 24 V DC supply voltage
Sensor supply:
Terminal 13 = U_s+
Terminal 19 = U_s–
Actuator supply:
Terminal 14 = L+
Terminals 20 to 24 = M
Not applicable
•
I
th
--
5
• AC-15
--
3
• DC 13 24 V
--
1
• DC 13 110 V
--
0.2
• DC 13 230 V
--
0.1
• Watchdog
Built-in
Built-in
I/O configuration
7
7
ID/ID2 code
0/F
0/F
Assignment of data bits
• Data bit D0
IN1/OUT1
IN1/OUT1
• Data bit D1
IN2/OUT2
IN2/OUT2
• Data bit D2
IN3/OUT3
IN3/OUT3
• Data bit D3
IN4/OUT4
IN4/OUT4
Connection
Spring-loaded terminal connection
Spring-loaded terminal connection
Conductor cross-sections in mm
2
Solid: 2
´
(0.25–1.5)
Finely stranded with end sleeve: 2
´
(0.25–1)
Finely stranded without end sleeve: 2
´
(0.25–1.5)
AWG conductor connections solid or stranded:
AWG 2
´
(24–16)
Solid: 2
´
(0.25–1.5)
Finely stranded with end sleeve: 2
´
(0.25–1)
Finely stranded without end sleeve: 2
´
(0.25–1.5)
AWG conductor connections solid or stranded:
AWG 2
´
(24–16)
Note 1
Disassembly tool for spring-loaded terminal
connection: See "Accessories"
Disassembly tool for spring-loaded terminal
connection: See "Accessories"
Note 2
The module has four floating inputs and four
floating switching outputs. For the input and output
circuits, an external additional supply of 20 to 30 V
according to VDE 0106 (PELV) Safety Class III is
required.
--
