SIEMENS 5930/5935 Business Gateway
User’s Guide
Chapter 4 User Setup
User Management
SIEMENS
35
Configure the TacPlus Server
Tacplus allows access control and user authentication to be managed from a remote server.To configure the
Tacplus Server:
1. Click
Configure Tacplus Server
on the left navigation pane of the User Management page. This displays
the Tacplus Server Configuration page.
2. In
Timeout
, enter the number of seconds to between retry attempts when the Tacplus Server cannot be
reached.
3. In
Retry
, enter the number of times the Tacplus Server should be contacted before attempting to connect
to the secondary server.
4. In
CACHE Timeout
, enter the number of seconds that must pass before the user must be authenticated
again.
5. For
Primary
and optionally
Secondary
servers, provide the
IP Address
,
Port
, and
Secret
for accessing
the Radius Server. The
Secret
is used to authenticatn requests between servers.
