SIEMENS 5930/5935 Business Gateway
User’s Guide
Chapter 6 Security Setup
IKE/IPSec Configuration
SIEMENS
77
5. From the
ESP Encryption Type
drop-down menu, select one of the following to specify the algorithm to
use to encrypt ESP IPSec packets:
•
DES
: Encrypts using a 56-bit key.
•
3DES
: Encrypts using three 56-bit keys to produce 168-bit encryption.
•
NULL
: ESP encapsulation, but no data encryption. ESP encapsulation verifies the source, but data is
sent in the clear to increase throughput.
•
NONE
: No ESP encapsulation and no encryption is used.
6. From the
IP Compression Method
drop-down menu, select one of the following to specify the algorithm to
to use to compress IPSec packets:
LZS IP compressio
n or
None
.
7. In
Phase II Proposal Lifetime
, enter the number of seconds after the IPSec SA expires. The default is
1800 seconds. Once this time is elapsed, the system will renegotiate the IKE connection.
8. In
Phase II Proposal Life Data
, enter the amount of data, measured in kilobytes, before the IPSec SA
terminates. After the specified quantity of data has been transferred, the system will renegotiate the IKE
connection. If zero is entered, the data quantity will be unlimited. By setting a limit on the amount of data
transferred, the risk of a key becoming compromised is reduced.
9. Click
Apply
.
