KTP700F Mobile Arctic
12
A5E49199858-AB, 02/2021
General safety instructions
WARNING
Unintended reactions during touch operation
If you touch the touch screen in 2 places at the same time, the operation is undefined. This incorrect operation can trigger
unintended reactions on the device. Personal injury or damage to the machine or plant may result.
•
Never touch more than one object on the touch screen.
•
Avoid unintended multiple touches, for example, with your knuckles or the palms of your hands.
•
Do not touch the touch screen during internal system processes.
•
Only perform an operating action when a plant screen is displayed on the touch screen.
Take the following general precautions:
•
Configure the plant so that safety-related functions are not operated with the touch screen.
•
Ensure that the touch screen is not dirty.
•
Switch off the device for cleaning and maintenance.
•
Calibrate the touch screen regularly.
WARNING
Unintended functions may be triggered with icing
If the operating temperature is below 2 °C, icing may occur on the front of the device. Icing may trigger unintended
functions in some circumstances.
To avoid triggering unintended functions, you can take the following measures, for example:
•
Install additional acknowledgment buttons in your plant for operating actions that bring about a dangerous operating
state.
•
Provide a password for operator actions or inputs that initiate a dangerous operating state.
Configuring the device
After the required software has been installed, the "KTP700F Mobile Arctic" HMI device is located under the following folder
in the TIA catalog tree:
"HMI > SIMATIC Mobile Panel > 7" Display"
The HMI device is configured in the same way as a fail-safe Mobile Panel 2nd Generation, except for the operator control
functions that are not available on the HMI device.
Device functions
Note
Updating the operating system via an external storage medium
If you have integrated the HMI device into the TIA Portal via the corresponding HSP, you have to select the option "Images
from a different location" in the dialog "Select an OS image file" and select the file with the image of the operating system
from the file system.
You can find the HMI device image file in the WinCC installation directory under the following path:
"\Siemens\Automation\Portal V<TIA version>\Data\Hmi\Transfer\<HMI device image version>\Images\KTP_7_Mobile_Arctic".
