Alarm, error and system messages
7.3 Batch mode display (SIMATIC MV325)
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03
41
Charge status display during charging
●
If there is less than 10% battery charge remaining, the 1st LED flashes at short intervals
during charging.
●
If the battery charge is 25% or more, the LEDs flash "ON" for 4 s and "OFF" for 1 s.
Battery charge status
Charge status display
< 10%
Flashing quickly
< 25%
25 ... 50%
50 ... 75%
> 75%
7.3
Batch mode display (SIMATIC MV325)
In batch mode, the memory symbol of the SIMATIC MV325 flashes at 10 second intervals
indicating that data was stored.
●
If the memory is full, the memory symbol flashes 5 times per second.
To release memory space, you need to download or delete data.
●
If no data is stored, the memory symbol does not flash.
You will find an explanation of how to switch the SIMATIC MV325 to batch mode in
Communication in batch mode (SIMATIC MV325) (Page 33).
①
Wireless symbol
②
Read confirmation
③
Memory symbol
