background image

 Speakerphone   35

Speakerphone

The Optiset E Standard, Advance Plus, and Memory telephones 
have a two-way speakerphone, consisting of a speaker and a 
microphone. You can use either the handset or the 
speakerphone to make or receive calls. During a conversation, 
you can use your speakerphone instead of your handset by 
pressing the Speakerphone key (the bottom default feature key) 
and hanging up the handset. If you want to switch back to using 
your handset, pick it up.

To make a call

To make a call using the Speakerphone feature, do one of the 
following procedures:

• dial without lifting the handset to automatically activate the 

speakerphone and place the call.

• press a Repdial key to automatically dial its programed 

extension 

• press the Speakerphone key to get a dial tone, then dial

To answer a call

Press the Speakerphone key and begin talking, or press the 
Repdial key (if present) next to the blinking status light.

To hang up

To disconnect a speakerphone call, press the Speakerphone key.

To switch during a call

If you are using the handset and want to use the speakerphone, 
press the Speakerphone key and hang up the handset. If you are 
using the speakerphone and want to use the handset, pick up the 
handset.

Summary of Contents for Advance Plus





















































Reviews: