Siemens CARECO Operating Instructions Manual Download | Manualshive

Page: 25 / 25

background image

GEAFOL- / CARECO-Cast-resin Transformer/ Operating Instructions

Frei verwendbar

© 2020 Siemens Energy

Page 25

Addresses:

Siemens Energy Global GmbH & Co. KG
Transformer plant Kirchheim
Hegelstraße 20
73230 Kirchheim/Teck, Germany
Tel. Central: +49 (0) 7021 9322-0
Tel. Product Support: +49 7021 9954 134
E-Mail: kirchheim-sck.energy@siemens-energy.com
Website: siemens-energy.com/geafol

Siemens Transforátor Zrt.
II. Rakoczi Ferenc ut 189
1214 Budapest, Ungarn
Tel.: +36 1 471-1100

Siemens Transformadores, S.A. De C.V.
Carretera Guanajuato-Silao Km. 8
36250 Guanajuato, GTO, Mexico
E-Mail: juan.alanis@siemens-energy.com
Tel: +52 5579559887

Siemens Transformer (Guangzhou) Co., Ltd.
26, Jungong Road, East Area, GETDD,
510530 Guangzhou, China
E-Mail: DTService.STGZ.cn@siemens-energy.com
Tel: +86 20 62663366

Siemens Energy Brasil Ltda.
Av. Eng. João Fernandes Gimenes Molina, 1745,
13213-080, Jundiaí-SP., Brasil
Email: posvendasdt.br@siemens-energy.com
Tel. +55 11 96322 7604

Published by

Siemens Energy Global GmbH & Co. KG
Transmission
Freyeslebenstr. 1
91058 Erlangen
Germany

For more information, please visit our website:
siemens-energy.com/geafol

Siemens Energy is a trademark licensed by Siemens AG.

Subject to changes and errors. The information given in this document only contains general descriptions and/or performance features
which may not always specifically reflect those described, or which may undergo modification in the course of further development of the
products. The requested performance features are binding only when they are expressly agreed upon in the concluded contract. All prod-
uct designations may be trademarks or product names of Siemens Energy Global GmbH & Co. KG or other companies whose use by third
parties for their own purposes could violate the rights of the owners.

For the U.S. published by

Siemens Energy, Inc
Transmission
4601 Six Forks Road
Raleigh, NC 27609
USA

«
...
23
24
25

Summary of Contents for CARECO


























Reviews:

No comments

Related manuals for CARECO

Brand: Easy wave Pages: 2

Brand: ICS Pages: 58

Brand: GE Pages: 40

Efector 800 VTV122

Brand: IFM Electronic Pages: 5

Brand: CMOSTEK Pages: 32

Brand: Iskra Pages: 37

Brand: ADTRAN Pages: 17

AN/PRC-117D Series

Brand: Harris Pages: 40

Brand: Samson Pages: 24

Brand: HESCH Pages: 16

Brand: M-system Pages: 3

Brand: elero Pages: 8

Brand: Zeggo Pages: 8

Brand: Camille Bauer Pages: 32

Brand: GO Systemelektronik Pages: 55

Brand: ACR Electronics Pages: 28

Brand: Yaesu Pages: 45

Brand: Wulfsberg Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands