Configuration
26
Siemens Building Technologies
Fire Safety & Security Products
01.2009
7.2
Network settings
You can set up your camera's basic settings, DDNS, and FTP server by selecting
Network Settings
in the
Configuration
menu.
7.2.1
Basic Settings
Basic
Camera Name
Input your camera name here. The default name is “nwcam05”.
Camera Name Enable
Network
DHCP
The IP address is automatically obtained when you select ON;
otherwise, select OFF to manually set up the network setting.
IP Address
Input your IP address here when you select DHCP off.
Subnet Mask
Please use default number: 255.255.255.0
Default Gateway
Leave blank as default setting. It is not necessary to enter Default
Gateway if it is not used.
Ask your Network Administrator for Default Gateway information.
Primary DNS
(Same as above)
Secondary DNS
(Same as above)
Port
Stream1-Stream2,
cropping1-5:
We recommend to use the default; if it needs to be changed please
check with system administrator.
UPnP
If “ON” is selected, the camera can be detected automatically by the
PC. No need to have IpFinder installed.
AUDIO output
If “ON” is selected, a voice message of camera’s IP address can be
delivered to external speaker via Audio output port.
