Configuration
28
Siemens Building Technologies
Fire Safety & Security Products
01.2009
7.3
Image parameters
7.3.1
Camera - Basic setting
NOTE
The Day/Night function is supported by the
CCMS1315
network camera only.
Day/Night
Configure auto black-and-white function. Auto B/W is the function to
gain sensitivity by turning to B/W automatically at dark environment.
ON: Auto B/W takes action.
OFF
:
Auto B/W does not take action.
NOTE:
The focus of the image may appear a little blurred in B/W mode when
an infrared illuminator is activated at night.
Day-Night Delay time
5 delay settings – 0, 5, 10, 15, 30 s – are available for selection to
avoid error induced by instantaneous lighting change. This allows the
delay time for the day/night function to be set.
Day-Night leve
3 level settings – high/mid/low – are available for selection. The
switching point from colour to black/white mode depends on the
ambient light conditions.
Basic items such as the size and quality of delivered images of the camera can be
set here.
1.
Select
Image Parameters
in the
Configuration
menu.
Î
A sub menu for Camera Settings will appear.
2.
Click "Basic" in the sub menu.
Î
The "Camera - Basic Settings" screen will appear.
3.
Configure the individual settings.
4.
Click the
Save
button to save your settings.
The settings will not be reflected unless the
Save
button is clicked.
