21/36
Siemens
Climatix HMI-DM
CB1P3916en02
Building Technologies
Functions and operations
2015-07-02
5.
Then re-enter the password. Press key
INFO
on this page and it will
redirect to the home page.
Application engineer can configure which kind of password can be changed by
programming in SCOPE.
If the application engineer configured that only the password of end user could be
changed,
Change Service Password
and
Change Factory Password
template
pages will not be displayed and entered. Press and hold key
ROLL
at any page
(except the error report page), and the log in/off page will be displayed.
If the application engineer configured that both the password of end user and
service user level could be changed, only
Change Factory Password
template
page will not be displayed and entered. Press and hold key
ROLL
at any page
(except the error report page), and the log in/off page will be displayed.
For detail information about how to configure the password, refer to
Climatix
SCOPE online help
.
To change the password of user level, select
Change User Password
and press
key
ROLL
, and the following page will be displayed.
Password
configuration
For example