101 / 244
Siemens
Standard application AHU
CE1P3977en_02
Building Technologies
Detail pages: Inputs and outputs
01.02.2010
Parameter
Range
Function
Reliability
– OK.
– Other
– Process Error
– Config err
Reliability state for hardware.
– Basis controller: Calibration lacking (output defec-
tive).
Extension module POL955: Calibration lacking
(Output defect) or communication to base control-
ler unavailable or the output is incorrectly config-
ured.
– Basis controller: Process error in program.
Extension module: Message no available.
– Basis Controller: Output configured incorrectly.
Extension module: Message no available.
Active prio
– Out of serv.
– Prio1
– ….
– Prio16
– Default
Displays the wired Prio elements currently on the
output.
Special infos
---
Go to Special info page (at access levels 6, 4 and 2
only).
Priority array
---
Go to Priority array page (at access levels 6, 4 and
2 only).
6.4.2 Special information
•
Read: Levels 6, 4 and 2.
•
Write: Not writable.
Parameter
Range
Function
Physical value
– Off
– Stage1
– Stage2
– Stage3
Value on output. Only differs from present value
with out of service intervention via BACnet.
Disable OffNormal
– Passive
– Active
The OffNormal alarm is disabled:
– Alarming is enabled.
– Alarming is switched off.
Communication
infos
---
Not enabled for multistate outputs.
6.4.3 Priority array
•
Read: Levels 6, 4 and 2.
•
Write: Read only.
Parameter
Range
Function
Default
Off / Stage1 / Stage2 / Stage3 / NULL
Replacement value, when no priority is ac-
tive. NULL means the Prio is disabled.
Prio 01
Fix Off
Value for priority 1 (always Off): Plant is
locked during configuration or during control-
Access level
Parameter
Access level
Parameter
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 101
