111 / 244
Siemens
Standard application AHU
CE1P3977en_02
Building Technologies
Detail pages: Controller
01.02.2010
Parameter
Range
Function
Invert outpt/funct
−
Passive
−
Active
Inverts control action of the controller and the
output signal in switched off state:
−
Output signal = 0 %.
−
Output signal = 100 %.
Function: See relationship between gain and
invert under special settings.
High limit
Maximum limit control for the controller.
Low limit
Minimum limit control for the controller.
Special settings
Go to Special settings page (at access levels 4
and 2 only).
7.1.2 Special settings
– Read: Levels 4 and 2.
– Write: Levels 4 and 2.
Parameter
Range
Function
Gain
-1000...1000
Amplification factor (KP). Set control action with In-
vert output/funct (heating or cooling).
Function: See Relationship gain and invert.
Int action time
0….18000
[s]
Integral action time (Tn).
Derivative act time
0….18000
[s]
Derivative action time (Td).
Out of service
−
Passive
−
Active
Out of service: Controller is taken out of the se-
quence and the control output is set to 0.
7.2 Cascade controller
Access level
Parameter
Relationship gain and
invert
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 111