139 / 244
Siemens
Standard application AHU
CE1P3977en_02
Building Technologies
Onboard WEB functionalities
01.02.2010
12 Onboard WEB functionalities
The controller POL638.xxx has a WEB Server for a remote server using a standard
web browser.
The following conditions must be met to connect via Ethernet:
– Corresponding mapping file (HMI4WEB) is loaded.
– The controller is connected to the Ethernet.
Main Index > System overview > Communication > TCP/IP
Parameter
Range
Function
IP
Displays controller IP address.
Mask
Displays subnet mask.
Gateway
Displays gateway address.
DHCP
−
Active
−
Passive
Displays type of address assignment:
−
DHCP server issues addresses.
−
IP address is fixed.
Name
Display controller name.
MAC
Displays controller MAC address.
Change settings
Go to page to parameterize onboard TCP/IP set-
tings.
Main Index > System overview > Communication > TCP/IP > Change settings
Parameter
Range
Function
IP
Enter controller IP address if DHCP is set to pas-
sive.
Mask
Enter subnet mask.
Gateway
Enter gateway address.
DHCP
−
Active
−
Passive
Displays type of address assignment:
−
DHCP server issues addresses.
−
IP address is fixed.
Name
Controller name.
100 MBit
−
Passive
−
Active
Change transmission rate:
−
10 MBit
−
100 MBit
Link
−
Passive
−
Active
−
Keine Verbindung zum Ethernet.
−
Verbindung zum Ethernet besteht.
Reset required !!
−
−
Execute
As a matter of principle, the controller must be set
after parameterization to assume the data.
User name
User name for logging onto to WEB HMI.
Password
Password for logging onto to WEB HMI.
Prerequisite
Display TCP/IP
parameter
Parameterization
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 139