215 / 244
Siemens
Standard application AHU
CE1P3977en_02
Building Technologies
Time scheduler
01.02.2010
18.2.4 Priority array
Main Index > Unit > Outputs > Analog outputs > Element > Priority array
Parameter
Function
Value range
Unit
Standard R
S Link
Default
Replacement value, when no priority is
active.
0…100
[%]
4 X
Prio 01
Value for priority 1.
0…100
[%]
4 X
Section:
...
...
...
4 X
6.2.4
Priority 16
Value for priority 16.
0…100
[%]
4 X
18.3 Detail pages: Digital outputs
18.3.1 General
Main Index > Unit > Outputs > Digital outputs > Element
Parameter
Function
Value range
Unit
Standard R
S Link
Manual operation
Manual operation on element (e.g. pump).
Off.
On.
Auto: The program controls the output.
Off
On
NULL
4 4
Present Value
Present value for output.
Off
On
[%]
6 4
Reliability
Reliability state for hardware.
OK.
Other
Process error
Config err
6 4
Active prio
Displays the wired Prio elements currently
on the output.
Out of serv.
Prio1
….
Prio16
Default
6 4
Section:
6.3.1
Operating hours
Number of operating hours for the output. 0...
[h]
6
Operating seconds
(Reset)
Number of operating seconds for the out-
put. Enter 0 seconds to reset operating
hours to 0.
0...
[s]
6
Last op hours reset Date and time for the last time operating
hours was reset.
Wday, dd.mm.yyy
hh:mm:ss
6
Special settings
Go to special settings page.
4
Special infos
Go to special info page.
6
Priority array
Go to priority array page.
6
18.3.2 Special settings
Main Index > Unit > Outputs > Digital outputs > Element > Special settings
Parameter
Function
Value range
Unit
Standard R
S Link
Contact Function
Changes output from Normal open to Nor-
mal closed:
Normal open
Normal closed (In this position, the output is
enabled when the plant is shut down).
NO
NC
NO
4 4
Section:
6.3.2
18.3.3 Special information
Main Index > Unit > Outputs > Digital outputs > Element > Special infos
Parameter
Function
Value range
Unit
Standard R
S Link
Physical value
Value on output. Only differs from present
value with out of service intervention via
BACnet. OK?
Off
On
6
Disable OffNormal
Display OffNormal alarms.
No alarm pending.
Alarm pending.
Passive
Activ
6
Section:
6.3.3
BACnet fdbk value
If connected: Feedback value from the bus.
6
Communication infos Not enabled for digital outputs.
6
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 215