Approvals
CP 154xSP-1
Operating Instructions, 12/2019, C79000-G8976-C426-05
103
The current versions of the standards can be seen in the EU Declaration of Conformity, see
above.
The conditions must be met for safe usage of the product according to the sectionNotes on
use in hazardous areas according to ATEX / IECEx (Page 41).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you can find here:
●
In the SIMATIC NET Manual Collection under
"All documents" >"Use of subassemblies/modules in a Zone 2 Hazardous Area"
●
On the Internet at the following address:
Link: (
https://support.industry.siemens.com/cs/ww/en/view/78381013
EMC
The CP meets the requirements of the EU Directive 2014/30/EU "Electromagnetic
Compatibility" (EMC directive).
Applied standards:
●
EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments
●
EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
RoHS
The CP meets the requirements of the EC directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.
Applied standard:
●
EN 50581:2012
c(UL)us
Applied standards:
●
Underwriters Laboratories, Inc.: UL 61010-1 (Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements)
●
IEC/UL 61010-2-201 (Safety requirements for electrical equipment for measurement,
control and laboratory use. Particular requirements for control equipment)
●
Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E85972 (NRAG, NRAG7)
