Communications
configuring
System- and communication configuring D7-SYS - SIMADYN D
3-95
Edition 12.2003
•
The channel name, address stage 1 and address stage 2 are
specified at connection AR of the receive block. SIMADYN D executes
the FMS utility "Get OV" (optional) and "Read" on the remote object.
Address example
1. Function block CTV:
−
AT- 'PZD1.0017.33500'
−
SIMADYN D writes, via communications association 17, into the
remote object with the FMS index 33500. A "Get OV" is not
executed.
2. Function block CRV:
−
AR- 'PZD1.0404.actual value'
−
SIMADYN D reads the external object with the "Actual value" name
via communications association 4. Before this, a "Get OV" is exe-
cuted on the object using the same communications association.
•
The channel name and address stage 1 are specified at the address
connection of the transmit block:
−
AT- 'channel name.00mm'
•
SIMADYN D is server, and transmits the value of this object using the
(unconfirmed) FMS utility "Information report" via the communications
association "mm". This communications association must be the
"Broadcast transmitter" type.
•
When transmitting using "Information report", the FMS index of the
object is supplied. If a symbolic name is configured as channel name,
then the index is automatically assigned, and is therefore not visible to
the user.
NOTE
If the object index is known to the receiver in the Information report, then
it must be explicitly configured as channel name (range: "6000" to
"6199").
•
The channel name and address stage 1 are specified at the address
connection of the receive block.
−
AR- 'channel name.00mm'
•
SIMADYN D is a client and receives the contents of the remote object
using the (unconfirmed) FMS utility "Information report" via the
communications association "mm". This communications association
must be the "Broadcast receiver" type.
Broadcast
transmitter
Broadcast receiver
