Siemens DE 628M Series, Operating Instructions Manual

11

en

Using the menu

The appliance requires less energy to heat the water and 
therefore economises on costs. The consumption figures for 
energy, water and the resulting costs can be displayed. In 
order to retrieve the consumption figures, it is necessary to 
make some settings via the menu. 

Open the menu

■

Press and hold the rotary selector switch for at least 
5 seconds.

Select the menu items

The following menu items can be selected:

■

Turn the rotary selector switch: to switch between 
the menu items in the current menu level.

■

Briefly press the rotary selector switch: to navigate 
to the next menu level or to confirm a selection.

Note: Following a successful entry, the selected value will be 
displayed for 10 seconds.

Exit the menu

■

Select  

Zurück

[back]

  in the menu.

or

■

Press any comfort key.

Note: If no entry is made within 30 seconds, then the appli-
ance automatically exits the menu.

Menu item  

Einstellung

[setting]

Important: The entries for  

Datum 

/ 

Uhrzeit

[date 

/ 

time]

and  

Kosten

[cost]

  are required in order to subsequently 

retrieve consumption figures from  

Verbrauch

[consump-

tion]

. If no entry is made, then the appliance only displays 

partial values.

Example of a menu setting

In this example, the language is to be set to  

Englisch

[english]

.

The factory setting for the menu language is  

Deutsch

[german]

. To change the language to  

Englisch

[ 

english]

:

■

Press and hold the rotary selector switch for at least 
5 seconds.

■

Turn the rotary selector switch and select  

Einstellung

[setting]

. Press the rotary selector switch.

■

Turn the rotary selector switch and select  

Sprache

[language]

. Press the rotary selector switch.

■

Turn the rotary selector switch and select  

Englisch

[english]

. Press the rotary selector switch. 

The language is now set to English.

■

Wait a moment or press the rotary selector switch.

■

Turn the rotary selector switch. Select other menu items 
and enter settings.

or

■

Press any comfort key to exit the menu.

The following settings can be selected

Verbrauch

[consumption]

Einstellung

[setting]

Zurück 
[back]

Sprache

[language]

Datum 

/ 

Uhrzeit

[date 

/ 

time]

Reset

[reset]

Zurück 
[back]

Display consumption 
figures, see chapter 
“Menu item  

Verbrauch

[consumption]

”

Enter settings

Set language to German 
or English

Enter current date 
and time (in order to 
retrieve consumption 
 figures later on)

Delete all individual en-
tries and reload factory 
default settings

Anzeige prüfen

[display test]

Show all symbols

Kosten 
[cost]

Enter cost for  

Energie

[energy]

  per kWh and  

Wasser

[water]

  per m³ 

(in order to retrieve con-
sumption figures later on)

One menu level back

Exit the menu

Press and hold 
for 5 seconds

Menu item  

Verbrauch

[consumption]

Note: If either no entry is input or if the entry is incom-
plete under  

Einstellung [setting]

, then only the 

consumption figures accumulated since initial start-up (or 
since last reset) are displayed:  

Gesamtlaufzeit [total 

currency]

.

Example of a consumption readout

To display the energy consumption:

■

Press and hold the rotary selector switch for at least 
5 seconds.

■

Turn the rotary selector switch and select  

Verbrauch

[consumption]

. Press the rotary selector switch.

■

Turn the rotary selector switch and select  

Energie

[ 

energy]

. Press the rotary selector switch.