124/166
Siemens
RXB (KNX) application library
FNC Description of functions for FC-10, FC-11, FC-12
CM110385en_05
Building Technologies
General and central functions
28 Feb 2009
The following functions are enabled or configured under
General
or
Central functions
.
*)
Room number
and
Device name
do not influence the application; they are used only
for plant documentation purposes. We recommend to use this feature.
HandyTool
The general and central functions are set with parameters 117 – 137. For detailed
information, refer to the individual sections.
ACS
Service
11.2
11.3
11.4
*)
11.16
