138/166
Siemens
RXB (KNX) application library
FNC Description of functions for FC-10, FC-11, FC-12
CM110385en_05
Building Technologies
General and central functions
28 Feb 2009
11.17.3 Mapping the sensor B1 to the Konnex bus
B1
RXB... Room controller
Analog input B1
10385Z201en
Temperature sensor B1 can also be connected to the bus in S-mode as a universal
temperature (e.g. outside temperature). To do this, the temperature sensor must be
parameterized as "only meas value acquisition" (see page 76.)
Analog input B1 (Output communication object)
Flags
R W C T U
Type Send
heartbeat
States
1 0 1 1 0
9.001
DPT_Value_Temp
Yes
11.18 Software version
The present software version can be read via the HandyTool
(not available for devices with index A).
HandyTool
Parameter HandyTool
Application set
*236 424 = RXB21.1/FC-10
425 = RXB21.1/FC-11
426 = RXB22.1/FC-12
427 = RXL21.1/FC-10
428 = RXL21.1/FC-11
429 = RXL22.1/FC-12
Application version
*237 *)
Operating system version
*238 *)
KNX interface version
*239 *)
*) This information serves to identify the controller's software version. You can use it in
case of a service request.
11.19 Device state
If the application is ready (loaded and tested), parameter 240 is set to 1.
HandyTool
Parameter HandyTool
Device state
*240
In Service mode the device state is always = 0 because the application is not running.
Hinweis
