Mechanical design
•
The unit is designed for mounting in a
conduit box (A)
– Square
CEE/VDE (type A)
–
Rectangular
3 modules landscape
(suitability to be clarified in advance).
•
The
base plate (B)
(rectangular or landscape) contains:
– A hook to attach a securing strap to protect against tampering
(the strap is not provided)
– an earthing plate (quick slide connector) to connect an earthing cable
•
One
Bezel (C)
is supplied:
– Siemens DELTA line (
square
, with the QMX3.P36F)
– Siemens similar to DELTA azio 120 x 180
(
rectangular
, with the QMX3.P36G)
Bezels from various other manufacturers can also be used
(
suitability to be clarified in advance
).
•
The
operator unit (D)
incorporates the room temperature sensor element, keys,
LCD panel, KNX PL-Link plug, tool plug, and spring clamps to hold the operator
unit in the base plate.
Disposal
The device is considered an electronics device for disposal in terms of European
Directive 2012/19/EU and may not be disposed of as domestic garbage.
•
Dispose of the device through channels provided for this purpose.
•
Comply with all local and currently applicable laws and regulations.
3 / 14
Siemens
QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link
CM2N1601en_04
Building Technologies
2016-03-24
