Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
38 of 42
Unrestricted
Figure 24
Alignment marks and lip seal mating indicator
•
When fully mated the lip seal will not be visible, and connection should look like as shown
•
If the lip seal can still be seen, remove and retry making connection by following the
procedure again.
•
If con
nectors can’t be mated both the plug and receptacle need to be inspected for any mis-
alignment damage or debris that is preventing connection.
•
If any damage has occurred, please contact Siemens Energy Technical Support for advice.
ROV connector maximum misalignment values and mating forces
Refer to section 5.1