Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
9 of 42
Unrestricted
2.5
Product marking
Figure 2
Product marking on DigiTRON product
Siemens Energy Subsea DigiTRON products are marked with the Siemens Energy part number and
unique serial number. Also, the voltage, temperature and water depth ratings are indicated. Marking
locations are typically on the metal bodies of the connectors. Refer to Figure 2.
2.6
CE label/marking
The CE label/marking where applicable shows that the products comply with the requirements of the
applicable directives as follows:
•
2014/35/EU
– Low Voltage Directive
Declaration of Conformity will be supplied with the goods.
2.7
Product examples
Figure 3
Typical flange mounted connector