Configuration
29
Building Technologies
CFMC1315-LP Configuration Manual EN
Fire Safety & Security Products
05/05/2009
UpnP Use
UpnP
When set to ON, the camera can be detected automatically by the PC. It
is not necessary to install the IpFinder program.
Audio Output Use
Audio Output
When set to ON, a voice message of the camera’s IP address can be
delivered to an external speaker via the audio output port.
Bandwidth Control Port
Bandwith Port
OFF: The network camera will stream images at the maximum frame
rate allowed by the network.
ON: The network camera will display images up to the set bandwidth;
using a lower bandwidth results in lower frame rates.
9.2.2
DDNS
This function is available when registering with the DDNS provider. To transmit the
camera’s host name to a DHCP server you have to configure this in the following
settings.
1.
Select Network Settings > DDNS.
2.
Configure the options as described in the table below.
3.
Click Save.
DDNS
Select ON to enable the DDNS function.
DDNS Server
Select your DDNS server (DnyDNS or DHS).
Host Name
Enter the host name.
Domain Name
Enter the domain name.
