Configuration
33
Building Technologies
CFMC1315-LP Configuration Manual EN
Fire Safety & Security Products
05/05/2009
Picture Flip
Select ON to display the image upside down or OFF to deactivate the
flip function.
Picture Mirror
Select ON to mirror the image or OFF the deactivate the mirror function.
9.3.2
Auto Patrol
1.
Select Image Parameters > Auto Patrol.
2.
Configure the options as described in the tables below.
3.
Click Save.
Tilt Angle
The PTZ camera tilt angle can be configured for different application
requirements. Set up tilt angle from -90° to 30°.
(Scan) Speed
The auto scan speed can be configured between 1 and 90°/s. Higher
values will result in a higher tilt speed.
Patrol setup
There are 4 auto patrol settings for end user selection. The auto patrol
function will continuously scan up to 64 preset positions and is not
limited by the scan range.
Stop Time
Select the time for which the camera will stop at each position during
scanning between 5 and 60 s
Preset selection Select the presets between 1 and 64 that will be called during the
patrol.
