Configuration
35
Building Technologies
CFMC1315-LP Configuration Manual EN
Fire Safety & Security Products
05/05/2009
9.3.4
Cropping
The cropping function can be activated only with the correct streaming settings.
See page [
J
23] .
OSD textand MPEG4 is not supported when cropping function is on.
1.
Select Image Parameters >Cropping.
2.
Mark the checkbox Enable and fill in the name, then click Set Cropping Area to
start cropping setting.
3.
Select one type of cropping area using the area buttons.
Ö
A red-mesh rectangle will appear on the screen.
4.
To select the cropping area, move the mouse to the desired position on the
screen, then click the left mouse button, and the red mesh will be centred to
that position.
5.
Click OK to finish the setting, and return to the Cropping menu.
6.
Click Save.
