Configuration
52
Building Technologies
CFMC1315-LP Configuration Manual EN
Fire Safety & Security Products
05/05/2009
Synchronization
mode
Manual: Enter the date and time to set up system time.
NTP: You can also enable Network Time Protocol (NTP) by NTP server.
Enter a host name for the NTP server, select a time adjustment period,
and click the "Save and Test " button to start testing the NTP function.
Synchronization from PC: System date/time will be synchronized by the
PC date/time.
Date and Time
If “Manual” is selected, the date and time can be entered manually.
If “NTP” is selected, the date and time will be synchronized by the NTP
server.
If “Synchronization from PC” is selected, the date and time will be
synchronized by the PC.
Daylight Saving Select ON to active the daylight-saving function if you are in a daylight-
saving time zone (effective for NTP mode only).
9.8
Access protection
9.8.1
Administrator
1.
Select Access protection > Administrator.
2.
Configure the options as described in the table below.
3.
Click Save.
User ID
The default setting for the administrator user ID is “admin”.
Enter your individual user name if you want to change the default setting.
Password
The default setting for the administrator password is “admin”.
Enter your individual password if you want to change the default setting.
Password
(confirm)
If you change the administrator password, confirm the new individual
password by retyping it.
Language
Select your individual language of the user interface.
Logoff Time
Enter the time (sec) after which the administrator will automatically be
logged off. OFF means no automatic log off.
