Siemens ECOS SRIF 2002, Operating Instructions Manual

Copyright Siemens AG 2003, All rights reserved

This document shall not be transmitted or reproduced, nor shall its
contents be exploited or disclosed to third persons without prior
written consent from Siemens. Infringements shall entitle to damage
claims. All rights reserved, in particular in case of a patent grant or
utility model registration.

Disclaimer of liability

Although we have carefully checked the contents of this publication
for conformity with the hardware and software described, we cannot
guarantee complete conformity since errors cannot be excluded.
The information provided in this manual is checked at regular
intervals and any corrections which might become necessary are
included in the next editions. The contents of this manual are
subject to change without prior notice. Any suggestions for
improvement are welcome.

Siemens AG
Automation & Drives
Business Unit: Automotive Industry Projects, Training
Production Automation, Automotive Industry
P.O. Box 48 48, D-90327 Nuremberg

© Siemens AG 2003
Subject to technical changes.

Siemens Aktiengesellschaft

Printed in the Federal Republic of Germany

Safety instructions

This document contains instructions you are strongly advised to observe in order to
guarantee your personal safety and to avoid personal damages. The instructions are
marked by a warning triangle and, depending on the degree of risk, are presented as
follows:

!

Warning

means that death or serious physical injuries may be caused if you do not take the
respective precautionary measures.

!

Caution

means that minor physical injuries may be caused if you do not take the respective
precautionary measures.

Note

provides important information on the product, the product handling or the respective
part of the documentation which requires special attention and whose observation is
recommendable due to possible advantages.

Use in accordance with specification

Please observe the following:

!

Warning

The device may only be used for applications specified in the catalogue and the
technical descriptions. It may further only be used in combination with non-Siemens
devices and components which are recommended or approved by Siemens.
Faultless and safe operation is only ensured if the product is transported, stored,
mounted and installed properly and if the operation and maintenance is carried out
conscientiously.