Siemens ET375FFP1 Series, Instruction Manual

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Automatic safety cut-out       

en

9

x

 flashes. Touch any symbol. The displays go out and 

the audible signal ceases.

Changing or cancelling the cooking time

Select the hotplate and then touch the 

0

 symbol twice. 

Change the cooking time or set to 

‹‹

 in the settings 

range.

Notes

■

You can set a cooking time of up to 99 minutes.

■

If the cooking time has counted down to the last 

minute, the timer display changes from minutes to 

seconds.

Automatic timer

You can use this function to preselect a cooking time 

for all hotplates. Each time a hotplate is switched on, 

the pre-selected cooking time then counts down. When 

the cooking time has elapsed, the hotplate switches off 

automatically.
You can find out how to switch on the automatic timer in 

the Basic settings section.

~

 Page 10

Note: 

You can change the cooking time for a hotplate 

or switch off the automatic timer for the hotplates:

Select the hotplate and then touch the 

0

 symbol twice. 

Change the cooking time or set to 

‹‹

 in the settings 

range.

Kitchen timer

You can use the kitchen timer to set a time of up to 99 

minutes. It runs independently of all the other settings.

Setting the kitchen timer

1.

Touch the 

0

 symbol repeatedly until the 

V

indicator lights up.

‹‹

 lights up in the timer display 

min

.

2.

Set the desired time in the settings range.

The timer starts counting down after a few seconds.

When the time has elapsed,

When the time has elapsed, you will hear an audible 

signal and 

‹‹

lights up in the display for 10 seconds. 

The indicator 

V

 flashes. Touch any symbol. The 

displays go out and the audible signal ceases.

 Setting the correct time

Touch the 

0

 symbol repeatedly until the 

V

 indicator 

lights up. Re-set in the control panel.

Stopwatch function

The stopwatch function displays the time which has 

passed since activating the function.
The stopwatch function only works when the hob is 

switched on. When the hob is switched off, the 

stopwatch function is switched off as well.
To switch on: Touch the 

0

 symbol repeatedly until the 

þ

 indicator lights up.

‹‹

 appears in the timer display. 

Touch the control panel at any point to start the time 

measurement. Seconds are displayed during the first 

minute, then minutes.
To switch off: Touch the 

0

 symbol repeatedly until the 

þ

 indicator lights up. Touch the control panel again at 

any point. The timer display goes out.

b

Automatic safety cut-out

Automatic safety cut-out

If a hotplate has been switched on for a long time 

without the setting being changed, the automatic time 

limit is activated.
The hotplate stops heating. 

”‰

 and the 

•

/

œ

 residual 

heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You 

can make new settings.
When the time limit is activated depends on the heat 

setting selected (1 to 10 hours).

k

Wipe protection

Wipe protection

If you wipe over the control panel while the hob is 

switched on, settings may be altered.
To prevent this from happening, your hob has a wipe 

protection function. Touch the 

#

 symbol. An audible 

signal sounds. Symbol 

#

 is lit. The control panel is 

locked for 30 seconds. You can now wipe over the 

control panel without altering any settings.

Note: 

The main switch is excluded from the wipe 

protection function. You can switch off the hob at any 

time.