Euroset 5040 / IM 1 en / A30350-M211-R601-1-SY19 / bigButton_en.fm / 06.08.2009
3
en
Connecting
Insert the short end of the coiled handset cord in the
socket provided in the handset and the long end in the
socket marked with an
a
on the underside of the
device. Plug the phone cord into the outlet on the wall
and the other end into the socket marked
Y
on the
underside of the device. Plug the mains adapter cable
into the power supply socket on the underside of the
device and plug the adapter itself into a mains socket.
Your telephone is now ready to use.
If the power supply is not plugged, the display and
keypad illumination, with the exception of Loud-
speaker key, doesn’t work.
Setting the internal clock
º3
Hold down the Set key. Initiate function.
The current set time is displayed in 24-
hour mode (default setting: 00:00).
o
Enter the time in hours <hh> and minutes
<mm> (24-hour mode).
º
Hold down the Set key.
If successful you will hear a positive confirmation
tone.
Making calls
Dialling a number
co
Lift handset, dial number.
or ...
o
L
Dial number, press Loudspeaker key. After
2 seconds the number is dialled.
c
Lift the handset if you want to talk via the
handset.
You can delete wrongly entered digits with
I
and
then enter the correct digit. Picking up or replacing
the handset while dialling interrupts the dialling
process.
Any digits after the 14th digit are moved from right to
left in the display. The last number Redial key
;
can be used to insert pauses when dialling, starting
from the 2nd digit.
Dial phone number via a Name key, see “Using
Name keys”.
Dial phone number from the calls list, see page 9.
Activating/deactivating handsfree talking
With this telephone you can also make calls (hands-
free mode) or settings without lifting the handset.
The best distance from the microphone for speaking
is about 50 cm.
When handsfree talking is active the Loudspeaker key
flashes.
◆
Activating during a call via the handset
L
+
a
With the Loudspeaker key pressed replace
the handset.
◆
Activating before dialling the number
L
Before dialling: hold down the Loud-
speaker key until you can hear the dialling
tone.
