Euroset 5040 / IM 1 en / A30350-M211-R601-1-SY19 / bigButton_en.fm / 06.08.2009
7
en
Activate/deactivate call duration display
The telephone can display the approximate call dura-
tion in the display (up to 99 min. 59 sec., default set-
ting: on). If the call duration display is activated, the
time display begins 8 seconds after the last digit is
dialled.
º18#
Hold down the Set key. Initiate function.
Press the Hash key.
0
/
1
0
: deactivate;
1
: activate.
º
Hold down the Set key.
Setting the pause time
If necessary, the pause time of the Pause key
;
(pause function from second input position) can be
changed to 1, 3 or 6 seconds (default setting: 3 sec-
onds).
º102
Hold down the Set key. Initiate function.
0
...
2
0
: 1 sec.;
1
: 3 sec.;
2
: 6 sec..
º
Hold down the Set key.
Changing the dialling mode
You can choose between two dialling modes:
º#
Hold down the Set key. Press the Hash
key.
1
/
2
1
: Tone dialling.
2
: Pulse dialling without flash function.
º
Hold down the Set key.
The dialling mode is saved.
Changing dialling modes during a call
If your telephone is set to pulse dialling and you want
to use functions that require tone dialling (e.g.
remote access to an answering machine), you can
change the dialling mode during a call.
*
With an open connection: press the Star
key.
o
Enter digits for remote control.
The telephone is reset to the original dialling mode by
hanging up the handset.
Operation on a PABX
Enter/delete an external line prefix
If you are using your telephone on a PABX, you may
have to save one or more external line prefixes. A
dialling pause is set automatically with the external
line prefix. You can save up to three external line pre-
fixes.
º0
Hold down the Set key. Initiate function.
If no external line prefix has been set in a
location,
z
appears in the display.
If several external line prefixes are saved,
these are displayed next to one another;
the current external line prefix to be
edited flashes.
If necessary, use the
;
key to toggle
between the external line prefixes dis-
played, to edit them as follows:
To delete an external line prefix:
º
Hold down the Set key.
To enter an external line prefix:
o
Enter a one- to three-digit code.
Enter additional external line prefixes:
;
o
Press the Redial key, enter next external
line prefix.
º
Hold down the Set key.
