Euroset 5040 / IM 1 en / A30350-M211-R601-1-SY19 / bigButton_en.fm / 06.08.2009
9
en
Viewing caller histories and dialling phone numbers
If there are entries in the calls list that have you have
not yet seen, the Calls list key flashes.
.
Press the Calls list key.
The phone number of the most recent
call appears in the display. Its position
number "01" is displayed to the left of the
number.
If the phone number is too long to be dis-
played completely, it will be displayed in
multiple steps.
(You can leave the calls list at any time by
pressing
;
.)
To scroll through the calls list:
H
...
I
Press the Down/Up key.
To view additional information:
#
Press the Hash key.
The date and time of the displayed entry
is displayed with the number of calls (on
the right).
Back to the calls list
(calling number dis-
play):
#
Press the Hash key again.
Dial the phone number:
L
Press the Loudspeaker key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Deleting entries in the calls list
Delete all entries at the same time
.
Press the Calls list key.
º*º
Hold down the Set key, press the star key
and hold down the Set key again.
The calls list is deleted and closed.
Delete individual entries
.
Press the Calls list key.
H
...
I
Scroll to the desired entry.
ºº
Hold down the Set key twice.
The entry is deleted.
Activating/deactivating display of the area code
You can set the telephone so that the area code is not
displayed for incoming calls. This can be useful, for
example, if you cannot see the last digits of a long
phone number on the display.
You can deactivate the display for 2 area codes (up to
5 digits each).
º5
Hold down the Set key. Initiate function.
If no number has been set in a storage
location
z
appears in the display.
If both storage locations are in use, these
are displayed side by side; the current
storage location to be edited flashes.
If necessary, use the
;
key to toggle
between the storage locations displayed
to edit them as follows:
Delete
a number:
º
Hold down the Set key.
Enter
a number:
o
Enter a one to five digit number.
Enter another prefix:
;
o
Press the last number redial key, enter
next prefix.
º
Hold down the Set key.
