en
powerMove Plus
12
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
8.2 flexInduction disconnecting
By default, the cooking zone is configured in such a
way that the two cooking zones are connected to each
other. To separate the cooking zones:
1.
Select one of the two cooking zones.
2.
Touch .
a
The Flex Zone is separated.
Notes
¡
You can change the default setting for the Flex
Zone. You can find out how to do this in the "Basic
¡
If you move or lift the item of cookware onto the act-
ive cooking zone, the cooking zone automatically
starts searching and the power level you selected
previously is retained.
8.3 flexInduction connect
▶
Touch .
a
The cooking zones are connected to each other
and continue to work together.
9 powerMove Plus
You can use this function to change the power level for
an item of cookware by simply moving it within the
FlexZone. For this, the zone is divided into three areas
with different power levels.
9.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡
Front section = power level 9.0
¡
Middle section = power level 5.0
¡
Rear section = power level .
You can change the standard setting for the default
power levels. You can find out how to do this in the
.
9.2 Activating powerMove Plus
Requirement:
Only place one item of cookware on a
FlexZone.
1.
Select one of the two cooking zones in the
FlexZone.
2.
Touch the active cooking mode.
3.
Select
a
The function is switched on.
Note:
You can change the power levels of the zones
during cooking.
9.3 Deactivating powerMove Plus
1.
Select a cooking zone.
2.
Touch the active cooking mode and switch to a dif-
ferent cooking mode.
a
The function is switched off.
