Wipe protection
en
17
18 Wipe protection
You can use this function to lock the control panel for
cleaning so that you do not accidentally change the
settings.
The lock has no effect on the main switch.
18.1 Switching on Wipe protection
1.
Open the docking menu.
2.
Touch . A signal sounds.
a
The control panel remains locked for 30 seconds.
a
After 30 seconds, a signal tone sounds and the
control panel is unlocked.
18.2 Switching off Wipe protection
To cancel the function early, follow the instructions on
the display.
19 Individual safety switch-off
The safety function is switched on if one cooking zone
is in operation for an extended period and you do not
change any settings. A message appears on the dis-
play and the cooking zone stops heating.
To switch off the display and reset the cooking zone,
touch any button.
20 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
20.1 Overview of the basic settings
Setting
Description and options
Language
Change the display language for the
appliance.
Home Connect You can use this function to connect
the appliance to your home network
and a mobile device.
cookConnect
System
You can use this function to control
certain functions of the extractor
hood via the hob.
Signal tones
You can use this function to select
warning tones that the appliance is
to output.
Duration of the
warning signal
You can use this function to change
the duration of the warning signal.
Signal tone
volume
You can use this function to change
the volume of the signal tones.
Button tones
You can use this function to select
whether the appliance emits tones
when you touch the buttons on the
touch display.
Display bright-
ness
Change the brightness of the display.
flexInduction
You can use this function to set the
switch-on mode for the function after
the hob has been switched on: Two
independent cooking zones or one
single zone.
powerMove
Plus
You can use this function to change
the preset power levels of the three
cooking areas of the FlexZone.
1
The function is not available in this model.
Setting
Description and options
Childproof
lock
You can use this function to automat-
ically lock the hob to prevent chil-
dren from using the appliance
without supervision.
quickStop
function
Allows the cooking zone to be
switched off quickly and directly via
the main display.
Brand logo
You can use this function to set
whether the brand logo is to be dis-
played when you switch on the hob.
reStart
You can use this function to set how
long the appliance saves the most
recently used settings when you
switch off the appliance.
Power limita-
tion
This enables you to limit the total
power of the hob, if required, due to
the circumstances of your electrical
installation. The available settings de-
pend on the maximum power of the
hob. You can find precise informa-
tion on the rating plate. If the function
is switched on and the hob has
reached the set power limit, is dis-
played and you cannot select a
higher power level.
Energy con-
sumption dis-
play
Shows the total energy consumption
in kWh between switching the cook-
ing zone on and off.
The accuracy of the display depends
on various factors such as the
voltage quality of the power supply.
Cooking
sensor
1
Add a new wireless cooking sensor.
1
The function is not available in this model.
