Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Hood connection
en
31
e
Hood connection
Hood connection
You can connect this appliance to a suitable extractor
hood and control the functions of the hood via your
hob.
There are various options for connecting the appliances
together:
Home Connect
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Observe the supplied Home Connect documents for
this.
Connecting appliances directly
If the appliance is directly connected to a cooker hood,
connection to the home network is no longer possible.
The appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
Connecting appliances via the home network
If the appliances are connected to each other via your
home network, both the hood controls and Home
Connect can be used to operate the hob.
Notes
■
Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are also observed when operating the
appliance via the hood controls on the
"Important safety information" on page 5
■
Using the controls on the extractor hood always
takes priority. It is not possible to use the hood
controls on the hob during this time.
■
In networked standby mode, your appliance requires
max. 2 W.
Setting up
To set up the connection between the hob and the
extractor hood, the hob must be switched on.
Connecting directly
Make sure that the extractor hood is switched off.
For more information refer to the section entitled
"Connect hob" in the instruction manual for your
extractor hood.
Note:
If you connect your hob directly to the extractor
hood, it cannot be connected to the home network as
well and you will not be able to use Home Connect any
longer.
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
™‚‡
setting appears.
‹
lights up on the cooking position display.
3.
Set the
‚
value on the control panel.
‚
lights up on the cooking position display.
4.
Start connection to the extractor hood within the next
2 minutes.
The hob is connected to the extractor hood when the
„
value appears on the cooking position display. The
symbols for the hood controls on the hob are displayed
on the hob's control panel.
Connecting via your home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Direct connection".
First of all make sure that the extractor hood is in the
home network.
1.
Touch the
0
symbol for 4 seconds.
Product information will be displayed.
2.
Touch the
0
symbol repeatedly until the
™‚‡
setting appears.
‹
lights up on the cooking position display.
3.
Set the
‚
value on the control panel.
‚
will flash on the hotplate display.
4.
Press the WPS button on the router within the next
2 minutes.
The hob is connected to the home network and the
ƒ
value appears in the cooking position display.
5.
Connect to the extractor hood.
