Commissioning
Commissioning the radio cell
6
34 | 62
Building Technologies
A6V10227639_k_en_--
Fire Safety
2016-11-28
6.2 Commissioning the radio cell
The radio gateway forms a radio cell with the radio devices that are connected.
The radio cell is switched to maintenance mode along with the radio gateway. To
ensure that radio devices are integrated into the correct radio cell, only one radio
cell may be in maintenance mode at any given time.
Start with the radio gateway. Activate the radio gateway, starting with the other
radio devices.
Figure 13: Radio gateway FDCW241
H2 Yellow LED for maintenance
mode
S1 Button for maintenance mode
H3 Yellow LED for power supply
and reset
S2 Reset button
H4 Yellow LED for radio network
The radio gateway is installed.
The radio gateway is not connected to the detector line.
The socket strips of the detector line have been wired in accordance with the
required topology.
The user is familiar with the content of chapter 'Changing and expanding the
FDnet/C-NET detector line' in the control panel documentation.
S2
S1
H2
H2
H3
H4
