About this document
Applicable documents
1
5 | 42
Building Technologies
A6V10349616_i_en_--
Fire Safety
2019-01-18
1 About this document
Retention and availability
NOTICE
Missing information
Damage due to misuse
●
This document must be available in a usable format throughout the entire life
cycle of the product. Keep the document for reference and ensure that it can
be accessed by target groups.
Should you require another copy of this document, please contact the Customer
Support Center, phone +49 89 9221-8000.
Goal and purpose
This document contains all information on the manual call point FDM223-Ex.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
This document is aimed at users who are planning, installing, commissioning,
operating, and maintaining a fire detection installation FS20/FS720 or SIGMASYS
with a line card (FDnet/C-NET) with addressed detector lines within the scope of
the ATEX directive or IECEx.
General knowledge about the structure and function of fire detection installations
FS20/FS720 is required in order to understand the information.
WARNING
Document A6V10324618 is an integral part of this document. You must observe
the information in both this document and document A6V10324618!
Before installing the device, you must make yourself familiar with the content of
document A6V10324618 'Planning, Mounting/Installation, Commissioning,
Maintenance of fire detection installations with addressed detector lines in
potentially explosive atmospheres'. You can download the current version of the
document from the Internet, at the address
