About this document
Applicable documents
1
5 | 46
Building Technologies
A6V10425652_en--_f
Fire Safety
2016-11-28
1 About this document
Goal and purpose
This document contains information on the radio manual call point FDM275-O.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Intended use
The radio manual call point FDM275-O may only be used in a fire detection system
with a radio gateway approved by the manufacturer.
The radio manual call point FDM275-O is compatible with the radio module
FDRF272-O.
Target groups
The information in this document is intended for the following target groups:
Target group
Activity
Qualification
Product Manager
Is responsible for information
passing between the manufacturer
and regional company.
Coordinates the flow of information
between the individual groups of
people involved in a project.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Product Managers.
Project Manager
Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
Provides the information required to
run the project.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Project Managers.
Project engineer
Sets parameters for product
depending on specific national
and/or customer requirements.
Checks operability and approves
the product for commissioning at the
place of installation.
Is responsible for troubleshooting.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Product Engineer.
Installation personnel
Assembles and installs the product
components at the place of
installation.
Carries out a performance check
following installation.
Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel
Configure the product at the place
of installation according to
customer-specific requirements.
Check the product operability and
release the product for use by the
operator.
Searches for and corrects
malfunctions.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for commissioning personnel.
Maintenance personnel
Carries out all maintenance work.
Checks that the products are in
perfect working order.
Searches for and corrects
malfunctions.
Has obtained suitable specialist
training for the function and for the
products.
