Directives and standards
9
Building Technologies
Fire Safety & Security Products
11.2008
3
Directives and standards
Compliance with the European Directive 2004/108/EC „Electromagnetic Compatibility” is achieved
only if the device is equipped with a ferrite core (see Section 9.6: Installing the ferrite core).
This product complies with the requirements of the following European directives.
The EU declaration of conformity is available from:
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG
76181 Karlsruhe
Germany
European Directive 2004/108/EC „Electromagnetic Compatibility”
Compliance with the European Directive 2004/108/EC has been proven by testing
according to the following standards:
Emitted interference:
EN 61000-6-4
EN 55022 Class A
Interference resistance: EN 50130-4
European Directive 89/106/EG „Construction Products“
Compliance with the European Directive 89/106/EEC has been proven by testing
according to the following standard:
Short-circuit isolators:
EN 54-17
Input/
output devices:
EN 54-18
