Setup
29
Building Technologies
Fire Safety & Security Products
11.2008
9.7
Setting the IP address of the client PC
1.
Select
Start > Settings > Control Panel > Network Connections
in the Windows Start menu.
2.
Right-click on the selected network connection.
3.
Select
Properties
in the context menu.
Î
The
Local Area Connection Properties
dialog box appears.
4.
Select an
Internet protocol (TCP/IP)
.
5.
Click on
Properties
.
Î
The
Internet Protocol (TCP/IP) Properties
dialog box appears.
6.
Activate the option
Use the following IP address
.
7.
Enter
169.254.xxx.xxx
for the IP address and 255.255.0.0 for the
subnet
mask
.
8.
Click
OK
.
9.
Restart your client PC.
Î
The device is now ready for software installation. See Section 10: Software.
