Trouble shooting
33
Building Technologies
Fire Safety & Security Products
11.2008
13 Trouble
shooting
When an error occurs which affects the proper function of the Video Fire
Controllers FDV241, a message is generated on the fire control panel. To remedy
the cause, additional information is available in the Video Fire Controller. This
information may be displayed for instance by the detector exchanger and tester
FDUD29x (for details see instruction manual for detector exchanger and tester,
doc. nos. 007227 and 009718).
Messages
Cause
Measures
Observe information
–
–
Exchange recommended
–
–
Exchange required
–
–
The video functionality of the Video Fire Controller
is not available.
1.
Check the video functionality.
2.
Check the external power source.
Invalid configuration.
Check the configuration.
There is a power supply error.
1.
Check the detector line voltage.
2.
Exchange the device.
There is a software error (watchdog error).
Exchange the device.
There is a storage error.
Exchange the device.
Error
There is a communication error between a detector
and the fire control panel.
Eliminate the cause of the fault.
14 Disposal
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by
the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic equipment. For
more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
