en
12
Ice maker
The ice maker makes ice cubes.
The ice maker starts to make ice cubes as soon as
the appliance has reached the set temperature. If
the ice cube container is full, the ice maker
automatically switches off.
ã=
Caution
Do not place bottles or food in the cube container
in order to cool them quickly. The ice maker may block
and be damaged.
Switching on
Note
If the ice maker is used for the first time and/or a long
period of not being used, do not use the ice which is
produced in the first day for hygiene reasons. Throw
the ice cubes away and clean the container!
1. Make sure that ice maker container is in its place
and locked into position.
2. Press ice maker button .
The symbol
ICE
is lit on the display panel.
Switching off
Note
Before switching off the ice maker, it is most important
that you switch the water supply to the appliance off for
a few hours.
Press ice maker button.
Ice and water dispenser
(not all models)
The following can be dispensed as required:
■
cooled water,
■
crushed ice,
■
ice cubes.
ã=
Warning
Never reach into the ice cube dispenser opening!
Risk
of injury!
ã=
Caution
Do not place bottles or food in the cube container
in order to cool them quickly. The ice maker may block
and be damaged.
Using the ice and water dispenser
The ice and water dispenser only works when
the appliance is connected to the water mains.
When the appliance has been switched on, it takes
approx. 24 hours until the first batch of ice cubes are
ready.
When the appliance has been connected, there are still
air bubbles in the lines.
Run off drinking water and pour away until water can be
dispensed without bubbles. Pour away the first 5
glasses.
When using the ice maker for the first time, do not use
the first 30-40 ice cubes for reasons of hygiene.