en
8
Switching the appliance on
Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
Operating tips
■
When the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
■
The fully automatic NoFrost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
Set the language
The display languages can be changed according
to the table in the chapter “Special functions”, “Setup
mode”.
In order to change the display language:
1. Press setup button.
2. Press the
¾
or
¿
setting button, until the set
language is displayed.
3. Press the
@
or
A
setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the
@
or
A
setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature
Freezer compartment
(can be selected from -16 °C to -24 °C)
We recommend a setting of -18 °C.
1. Activate the setup mode with the selection button
¾
.
2. Set the desired temperature with the
@
(warmer)
or
A
(cooler) setting buttons.
Special functions
The following special functions can be selected
or displayed:
Setup mode
In Setup mode you can make your personal settings.
Switching on
Press setup button.
The first menu (temperature unit) is displayed in
the fascia.
Making settings
1. Switch on setup mode.
2. Press the selection button
¾
or
¿
.
The next menu is displayed and its current setting
(mostly
ON
or
OFF
).
3. Press the setting button
@
or
A
.
The setting is saved, if the next menu is selected
using
¾
or
¿
.
Switching off
Press setup button.
All of the changed settings are stored.
Note
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again in
the fascia.
