FP-11 FirePrint
™
Detector
• Most Sophisticated “Detector Intelligence” available today
• Multi-Criteria fire detection for the price of a
photoelectric detector
• FirePrint™ Technology to discriminate between deceptive
phenomena and an actual fire
• Easily programmed to match specific hazard profiles from the
control panel
• Pre-Alarm reporting based on fire profile selected
• Remote sensitivity measurement capability
• System logic activation based on any of three inputs from
detector (smoke, heat or neural network)
• Field cleanable chamber with replaceable chamber
parts available
• Multi-color detector status LED
• Two-wire operation
• Compatible with Model DPU or FPI-32 field
programmer/tester
• Supports EnviroLINK software based automatic
environmental compensation
• Backward compatible with older MXL systems
(Rev. 2 and above)
• Optional fully programmable relay base , audible base, and
duct housing
•
UL Listed, ULC Listed, CSFM, FM, NYMEA
Approved
6175
CATALOG NUMBER
Intelligent Fire Detector for MXL, MXL-IQ, and MXLV Control Panels
Introduction
The FP-11 Intelligent Fire Detector provides the life
safety industry with the most highly evolved detection
system available today. The FP-11 utilizes advanced
detection technology that allows the detector to
distinguish nonthreatening deceptive phenomena, such
as cigarette smoke, from actual fire hazards, while
optimizing detection for the area in which it is in-
stalled. No other detection system available today
offers a higher level of protection or nuisance
alarm immunity. The FP-11 uses state-of-the-art
microprocessor circuitry with error check, detector
self-diagnostics and supervision programs.
The FP-11 intelligent fire detector is compatible with
the Siemens Building Technologies, Fire Safety Divi-
sion, Model DPU or FPI-32 field programmer/tester,
which is a compact, portable, menu-driven accessory
for electronically programming and testing detectors,
easily and reliably. The DPU or FPI-32 eliminates the
need for cumbersome, unreliable mechanical program-
ming methods and reduces installation and service
costs by electronically programming and testing the
detector prior to installation.
The FP-11 fire detector is compatible with the MXL
family of control panels including the MXL, MXL-IQ,
and MXLV.
The FP-11 detector is Underwriters Laboratories and
Underwriters Laboratories of Canada Listed.
Description
The FP-11 is a plug-in, two-wire, multi-sensor detector
with both photoelectric and thermal inputs and is
compatible with the MXL family of control panel
systems. Each detector consists of a dust resistant,
field cleanable photo chamber, a solid state
