background image

27

Making comfort calls

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Step

by

Step

Making comfort calls

The abbreviations in brackets after the titles stand for the corresponding ISDN 
feature. Some features can only be used if enabled by the provider (additional 
charge).

Making internal calls free of charge

If you have several handsets or supplementary devices, you can make internal 
calls free of charge.

Press [INT].

Your internal call number is displayed.

Enter the number of the internal subscriber required. 

Possible subscribers include:

or 

Press [LIST].

Select using [

ˆ

] and [OK]: 

(required internal subscriber).

The internal subscriber is called.

Collective call/Group call

You can make a collective call from any handset to all registered internal sub-
scribers.

Configuring internal collective call groups

In the basic configuration, all registered subscribers of the "telephone" device 
type (with the exception of fax and answering machine devices) are configured 
in the collective call group.

Press 

 for selection menus.

Select using [

ˆ

] and [OK]: 

Service Set up

 

 

Settings

 

 

Set up user 

 

Set up device

.

Select using [

ˆ

] and [

9

]: 

(required internal subscriber).

Select using [

ˆ

] and [OK]: 

Hunt group

.

Starting a collective call to all internal subscribers

Press the softkeys: [INT] 

 [LIST].

Select using [

ˆ

] and [OK]: 

Collective call

.

or 

Press the softkeys: [INT].

Press the key 

.

All available internal subscribers are called. You are connected to the first inter-
nal subscriber who answers the call.

1.

2.

11-18

Handsets

21, 22

Corded devices

40

41-48

PC via USB connection

*

Cordless PC via Gigaset M101 Data or M105 Data

*

*  This number is set up automatically by the base.

91-93

Integrated answering machine (Gigaset 3075isdn only)

2.

3.

1.

2.

3.

4.

1.

2.

1.

2.

Summary of Contents for Gigaset 3070 isdn




















































































Reviews: