User manual Leon A370 system English
6
Automatically registering
Place the handset in the charging cradle of the base station with its
display facing forward
.
Automatic registration can take up to 1 minutes. While this is
happening,
WAITING
flashes on the screen. The handset is assigned the
lowest unassigned internal number (1–4). The internal number is
shown on the display after registration, e.g. SIEMENES 1. If the internal
numbers 1 to 4 have already been assigned (four handsets have already
been registered), no additional handset can be registered on this base
unless one handset is deregistered.
Please use manually registering if automatically registering fail.
Manually registering
Press and hold the paging key on the base until the key flashing.
Then,
Press”
设 置
”(Setting) key
v
Press
”
▲ ▼
” key to
ADVANCE SET
确定
(Confirm)
v
rEGISTER,
确定
(confirm)
v
WAITING
flashing on display.
After registered successfully, the handset goes back to idle status. The
and the handset number will display on the displayer.
If fail to register, please repeat the operation above and try again.
Deregistering handsets
Notice: Don’t do this unless necessary!
Press”
设 置
”(Setting) key
v
”
▲ ▼
”Select
ADVANCE SET,
确定
(Confirm)
v
DErEGISTER,
确定
(confirm)
v
screen will display
HANDSET 1,
v
”
▲ ▼
”Select the handset you want to deregister,
确定
(confirm).
Changing handset name
The handset will be assign a name automatically, e.g.
“siemens 1”
“siemens 2”
. You can change the name by yourself (maximum 10
letters).
Press”
设 置
”(Setting) key
v
PERSONAL SET,
确定
(Confirm)
v
handset
Name,
确定
(Confirm)
v
Input name
确定
(Confirm).
Paging handsets
You can locate your handset using the base station.
Briefly
press the “
寻 呼
”(paging key)on the base station
All handsets will ring at the same time (“paging”), even if the ringer
tone are switched off.
End paging:
briefly
press the “
寻 呼
”(paging) key on the base station
or any key on handset.
Quick Index
register
DErEGISTER
handset name
寻 呼
paging
